Masterbatch for Coating and Extrusion Lamination
Coating and lamination performance depends on melt delivery, curtain stability, substrate treatment, bonding and the final structure. XINYU reviews the entire route before recommending a PE filler or film moisture-control direction.
What This Application Requires
Stable Melt Curtain and Coat Weight
Feeding, filtration, die temperature, air gap, line speed and drawdown affect curtain stability, neck-in, edge behavior and coating distribution.
Reliable Bonding and Surface
Substrate treatment, contamination, melt temperature, nip pressure and formulation influence adhesion, appearance, printing and sealing.
Approval of the Complete Structure
Bond strength, pinholes, sealing, odor, barrier and any regulatory requirement must be checked on the exact laminate construction.
Relevant XINYU Product Directions
PE Filler Masterbatch For Industrial Packaging Film
For selected blown-film and flexible-packaging routes where film cost, extrusion stability, gauge control, strength, surface and sealing must be assessed together.
Film Grade Desiccant Masterbatch
For selected film processing with limited residual moisture, evaluated through feeding, pressure, screen condition, bubble behavior, pinholes, surface, strength and sealing.
What to Review During a Trial
Provide the substrate, PE grade, recycled content, current formula, coating weight, die width, air gap and line speed.
01
Record pressure, screen condition, curtain movement, neck-in, edge trim, coat-weight profile, surface and roll build.
02
Control substrate treatment and preheating when comparing formulation changes.
03
Confirm adhesion, sealing, pinholes, odor, appearance and the other tests required by the final packaging structure.
04
What to Share with XINYU
Send the substrate and laminate structure, coating conditions, current defect and required bonding or sealing result. XINYU will determine whether a filler or moisture-control trial is technically relevant.
Discuss Your Coating Structure
Describe the substrate, coating layer and failure mode so the trial can be judged on the finished laminate rather than extrusion behavior alone.